19-netnicmodel访问访问CD-ROM/ROM使用

2022-07-02

使用-hda –hdb

qemu-system-x86_64 -enable-kvm -name ubuntutest -m 2048 -hda ubuntutest.img -hdb ubuntutest1.img -boot c -vnc :19 -net nic,model=virtio -net tap,ifname=tap0,script=no,downscript=no

访问CD-ROM/DVD-ROM

使用-cdrom

如果想直接挂载Host机器上的CD-ROM

-cdrom /dev/cdrom

boot order

-boot order=cdnop

c表示第一个hard drive

d表示cd or dvd

nop表示网络启动

可以用-boot menu=on显示boot menu

可以在monitor中设置boot_set c

boot from snapshot

如果带参数-snapshot，则所有的修改将被放入临时文件中，如果虚拟机结束了，修改就丢失了。

也可以在monitor里面用命令

commit all

hda commit

来提交修改

qemu-system-x86_64 -enable-kvm -name ubuntutest -m 2048 -hda ubuntutest.img -boot c -vnc :19 -net nic,model=virtio -net tap,ifname=tap0,script=no,downscript=no -snapshot

使用drive option

下面的参数是openstack启动的虚拟机中有关drive的参数

-drive file=/var/lib/nova/instances/d4c576ec-c70e-4de1-95b1-0b99ec9c2b9b/disk,if=none,id=drive-virtio-disk0,format=qcow2,cache=none

-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1

QEMU virtual machines emulate all devices needed to run a VM Guest.

Block Devices

Block devices are fixed or removable storage media usually referred to as ‘drives’.

Virtual machine drives are defined with -drive.

file=image_fname

Specifies the path to the disk image which will be used with this drive.

if=drive_interface

Specifies the type of interface to which the drive is connected. Currently only floppy, ide, or virtio are supported by SUSE. virtio defines a paravirtualized disk driver. Default is ide.

index=index_of_connector

Specifies the index number of a connector on the disk interface (see the if option) where the drive is connected.

media=type

Specifies the type of the media. Can be disk for hard disks, or cdrom for removable CD-ROM drives.

format=img_fmt

Specifies the format of the connected disk image. If not specified, the format is autodetected. Currently, SUSE supports qcow2, qed and raw formats.

cache=method

Specifies the caching method for the drive. Possible values are unsafe, writethrough, writeback, directsync, or none.

The operating system maintains apage cacheto improve the storage I/O performance.

In the KVM environment, both the host and guest operating systems can maintain their own page caches, resulting in two copies of data in memory.

In general, it is better to bypass at least one of these page caches.

If the application running in the guest is using direct I/O operations, then the guest cache would be bypassed.

If the guest is set up with no caching, then the host page cache is bypassed, effectively turning all I/O operations from the guest into direct I/O operations on the host.

virtio-blk-data-plane

The virtio-blk-data-plane is a new performance feature for KVM. It enables a high-performance code path for I/O requests coming from VM Guests. More specifically, this feature introduces dedicated threads (one per virtual block device) to process I/O requests going through the virtio-blk driver. It makes use of Linux AIO (asynchronous I/O interface) support in the VM Host Server Kernel directly—without the need to go through the QEMU block layer. Therefore it can sustain very high I/O rates on storage setups.

The virtio-blk-data-plane feature can be enabled or disabled by the x-data-plane=on|off option on the qemu command line when starting the VM Guest:

qemu [...] -drive if=none,id=drive0,cache=none,aio=native,
format=raw,file=filename -device virtio-blk-pci,drive=drive0,scsi=off,
config-wce=off,x-data-plane=on [...]

As of now, the virtio-blk-data-plane has the following limitations:

Graphic Devices and Display Options

This section describes QEMU options affecting the type of the emulated video card and the way VM Guest graphical output is displayed.

Defining Video Cards

QEMU uses -vga to define a video card used to display VM Guest graphical output. The -vga option understands the following values:

none

Disables video cards on VM Guest (no video card is emulated). You can still access the running VM Guest via the QEMU monitor and the serial console.

std

Emulates a standard VESA 2.0 VBE video card. Use it if you intend to use high display resolution on VM Guest.

cirrus

Emulates Cirrus Logic GD5446 video card. Good choice if you insist on high compatibility of the emulated video hardware.

-device cirrus-vga,id=video0,bus=pci.0,addr=0x2

Character Devices

Use -chardev to create a new character device. The option uses the following general syntax:

qemu-kvm [...] -chardev backend_type,id=id_string

where backend_type can be one of null, socket, udp, msmouse, vc, file, pipe, console, serial, pty, stdio, braille, tty, or parport.

All character devices must have a unique identification string up to 127 characters long. It is used to identify the device in other related directives.

A brief description of the available back-ends follows:

null

Creates an empty device which outputs no data and drops any data it receives.

stdio

Connects to QEMU’s process standard input and standard output.

socket

Creates a two-way stream socket. If path is specified, a Unix socket is created:

qemu-kvm [...] -chardev 
socket,id=unix_socket1,path=/tmp/unix_socket1,server

The server suboption specifies that the socket is a listening socket.

If port is specified, a TCP socket is created:

qemu-kvm [...] -chardev 
socket,id=tcp_socket1,host=localhost,port=7777,server,nowait

The command creates a local listening (server) TCP socket on port 7777. QEMU will not block waiting for a client to connect to the listening port (nowait).

-chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/instance-00000009.monitor,server,nowait

-mon chardev=charmonitor,id=monitor,mode=control

udp

Sends all network traffic from VM Guest to a remote host over the UDP protocol.

qemu-kvm [...] -chardev udp,id=udp_fwd,host=mercury.example.com,port=7777

The command binds port 7777 on the remote host mercury.example.com and sends VM Guest network traffic there.

vc

Creates a new QEMU text console. You can optionally specify the dimensions of the virtual console:

qemu-kvm [...] -chardev vc,id=vc1,width=640,height=480 -mon chardev=vc1

The command creates a new virtual console called vc1 of the specified size, and connects the QEMU monitor to it.

file

Logs all traffic from VM Guest to a file on VM Host Server. The path is required and will be created if it does not exist.

qemu-kvm [...] -chardev file,id=qemu_log1,path=/var/log/qemu/guest1.log

-chardev file,id=charserial0,path=/var/lib/nova/instances/d4c576ec-c70e-4de1-95b1-0b99ec9c2b9b/console.log 

-device isa-serial,chardev=charserial0,id=serial0

-chardev pty ,id=id

Create a new pseudo-terminal on the host and connect to it.

-chardev pty,id=charserial1

-device isa-serial,chardev=charserial1,id=serial1

A pseudoterminal (sometimes abbreviated "pty") is a pair of virtual
       character devices that provide a bidirectional communication channel.
       One end of the channel is called the master; the other end is called
       the slave.  The slave end of the pseudoterminal provides an interface
       that behaves exactly like a classical terminal.  A process that
       expects to be connected to a terminal, can open the slave end of a
       pseudoterminal and then be driven by a program that has opened the
       master end.  Anything that is written on the master end is provided
       to the process on the slave end as though it was input typed on a
       terminal.  For example, writing the interrupt character (usually
       control-C) to the master device would cause an interrupt signal
       (SIGINT) to be generated for the foreground process group that is
       connected to the slave.

By default QEMU creates a set of character devices for serial and parallel ports, and a special console for QEMU monitor. You can, however, create your own character devices and use them for just mentioned purposes. The following options will help you:

-serial char_dev

Redirects the VM Guest’s virtual serial port to a character device char_dev on VM Host Server. By default, it is a virtual console (vc) in graphical mode, and stdio in non-graphical mode. The -serial understands many suboptions. See the manual page man 1 qemu-kvm for their complete list.

You can emulate up to 4 serial ports. Use -serial none to disable all serial ports.

-parallel device

Redirects the VM Guest’s parallel port to a device. This option supports the same devices as -serial.

HINT:With SUSE Linux Enterprise Server as a VM Host Server, you can directly use the hardware parallel port devices /dev/parportN where N is the number of the port.

You can emulate up to 3 parallel ports. Use -parallel none to disable all parallel ports.

-monitor char_dev

Redirects the QEMU monitor to a character device char_dev on VM Host Server. This option supports the same devices as -serial. By default, it is a virtual console (vc) in a graphical mode, and stdio in non-graphical mode.

分类：

技术点：

相关文章：